To Next Page

To Previous Page

Using the System

2. Configure the following settings as needed:

NOTE

The settings listed below are only shown if they are supported on the selected camera. Some camera

models do not support all settings.

• Mirror: Select Enable to flip the image horizontally.

• Flip: Select Flip 180° to flip the image vertically, or select No Flip for the default

orientation.

• Corridor Mode: Not supported.

• BLC Mode: Select High or Low to enable back light compensation or Off to dis-

able. Back light compensation adjusts the lighting levels in the picture so you can

see objects in the foreground if there is a strong light source behind them.

• Scene Mode: The Scene Mode allows you to adjust white balance levels for the

camera. Select Schedule for the camera to automatically adjust the white balance.

Select Sunny or Night to use preset white balance levels. Select Customized to

manually set blue and red levels.

• Day&Night: This setting sets the camera’s day/night mode. Select Colorful for the

camera to use color mode at all times. Select Schedule for the camera to automati-

cally determine whether to use color or black and white mode. Select Black&White

for the camera to use black and white mode at all times.

NOTE

It is recommended to select Schedule mode, as using Colorful may impact the camera’s perform-

ance at night.

• Saturation: Adjust the vibrancy of colors in the image.

• Brightness: Adjust the image brightness.

• Contrast: Adjust the image contrast.

• Hue: Adjust the color hue of the image.

#LX400070; r. 1.0/27147/27147; en-US

Lorex LNR110 Series User Manual

Questions and Answers: