Lorex LNR110 Series User Manual

Using the Main Menu13
To search for system logs:
1. From the Main Menu, click
and then select Log.
2. Under Type, select the log type to search for.
3. Under Start Time and End Time, select the start and end time for your search.
4. Click Search.
5. (Optional) Click Backup to export logs to a USB thumb drive connected to the system.
13.3 Setting
The Setting menu allows you to configure general system, schedule, network, recording,
display, and motion settings. It also allows you to restore the system to factory defaults.
13.3.1 Network
The Network menu allows you to configure network parameters for your system.
NOTE
The WiFi menu is not supported.
13.3.2 Selecting DHCP or Static IP Address (TCP/IP)
The TCP/IP menu allows you to configure IP address settings.
To configure IP address settings:
1. From the Main Menu, click
and then select Network>TCP/IP.
#LX400070; r. 1.0/27147/27147; en-US
54

Lorex LNR110 Series Specifications

General

Brand	Lorex
Model	LNR110 Series
Category	Network Hardware
Language	English