Lorex LW2003 User Manual

23
8. Help
The camera and monitor are not detecting each other
• Ensure you have selected the correct camera channel.
• Mak
e sure the camera is turned on.
• Make sure the camera is charged.
• The camera and monitor may be out of range. Move the monitor and
camera closer together.
• Reset the monitor and camera by removing the battery from the
monitor. Next, turn the camera power off. Wait for 60 seconds and power
the units back on.
• You may need to pair the camera and the monitor again. For details,
see “4. Pairing Up Cameras” on page 9.
Feedback/Squealing noise coming from the monitor
• Your camera and monitor may be too cl
ose. Move them further apart.
• Make sure the monitor and camera are not near televisions,
computers, cordless/mobile phones or other electrical equipment.

Lorex LW2003 Specifications

General Specifications

transmission frequency	ISM 2, 400~2, 482 MHz
transmission power	18 dBm
unobstructed effective range	150 m / 450 ft
spread spectrum	FHSS
modulation mode	GFSK
operating temperature	0-50ºC / 32-122ºF
operating humidity	Less than 90%

Camera Specifications

imaging sensor type	CMOS
picture total pixels	H:240, V:320
minimum illumination	0 Lux (IR on)
night video distance	7 m / 22 ft
view angle	H: 38º V: 50º
image resolution	240 x 320 up to 25 fps
consumption current (max.)	390 mA
power supply	5 V DC
dimensions (W x D x H)	66 x 95 x 115 mm / 2.6 x 3.8 x 4.6"
weight	0.25 kg / 0.5 lbs

Receiver Specifications

LCD screen type	2.4 “ TFT-LCD
effective pixels	H: 240, V:320
receiving sensitivity	<.81 dBm
consumption current (max.)	250 mA
power supply	5 V DC
dimensions (W x D x H)	48 x 17 x 117 mm / 1.9 x 0.7 x 4.6"
weight	0.14 kg / 0.3 lbs

Product Information

package dimensions (LW2003)	199 x 69 x 135 mm / 7.8 x 2.7 x 5.3"
package cube (LW2003)	0.0025 cbm / 0.09 cbf
package weight (LW2003)	0.7 kg / 1.5 lbs
package dimensions (LW2003F)	200 x 69 x 139 mm / 7.9 x 2.7 x 5.5"
package cube (LW2003F)	0.0025 cbm / 0.09 cbf
package weight (LW2003F)	0.7 kg / 1.5 lbs