Delivery, Acceptance and Transportation
7 Delivery, Acceptance and Transportation
7.1 Delivery and Acceptance
The users shall check and accept the purchased tractors while purchasing, focusing on the following aspects:
Accompanying documents are complete
The accompanying documents include: Operation Manual for Tractor, Product Qualification Certificate,
Three Guarantees Service Certificate, Packing List of Accompanying Items, "Engine Accompanying
Technical Documents" (from engine supporting manufacturers), and Parts Diagram of the Tractor. Check
whether the corresponding numbers on the Product Qualification Certificate, Three Guarantees Service
Certificate and Engine Accompanying Technical Documents are consistent with the real products.
Accompanying items are complete
Check the accompanying items according to Accompanying Items Packing List, including
accompanying spare parts and accompanying tools. Engine accompanying items shall be subject to the
provisions in the Engine Accompanying Technical Documents (if doubtful, please contact the dealer).
Tractor is in good condition
As the tractor is shipped or driven to delivery, the technical condition may change, and the user can
further determine the machine condition while purchasing.
7.2 Transportation
During the transportation, if it is transferred by itself, it shall strictly abide by the traffic rules, and the
driving distance between the two tractors shall be at least 60m to avoid accidents causing crashes; if it is
transferred by vehicles, the following points shall be achieved:
During loading or unloading of the tractors, a flat place shall be selected;
Special unloading platform shall be used during loading or unloading of the tractors.
There must be assistants to guide on site, and no irrelevant personnel shall be allowed to approach.
After loading, put the suspension rod piece to the lowest position, pull the hand brake, shift to the reverse
gear, pull out the starting key, lock the door, and turn off the main
power switch.
Fix the front and rear of the four tires in "splayed" shape with iron wires, reliably fasten the front and rear
tires with wedges, and pull the rear axle beam with iron wires.
Pull the rearview mirror inward if possible, and remove it if necessary. At the same time, make sure that the
hood is closed. With safety frame model,
To Next Page
Loading...