Lovol TE Series - Technical Specifications; Product Model; Main Technical Specifications of te Series Tractors

Technical Specifications
8 Technical Specifications
8.1 Product Model
The product model of LOVOL-TE series tractor has the following meanings:
TE ○ ○ ○
C:cab; R: Rear ROPS
Type code, 0 indicates four-wheel type for rear-wheel drive; 4 indicates four-wheel
drive type
Power code, indicated by the engine rated power value (kW) multiplying by an integer clos
e to the coefficient of 1.36.
Series code
The corresponding power is as follows:
Power corresponding to product model:
The rated power of TE4043C and TE4043R wheeled tractors is 29.4 kW [40PS]
Product executive standard: Q/LWZ 001 LOVOL Wheeled Tractor
Diagram of Product Model and Factory Number Location
8.2 Main Technical Specifications for Four-wheel Drive Models of TE Series Tractors
Table 8-1 Main Technical Specifications for Four-wheel Drive Models of LOVOL-TE Series Tractors
Model
Unit
LOVOL
TE4043C
TE4043R
Type
——
4 × 4 wheeled
Calibration traction force
kN
10
Maximum power of power output shaft
kW
≥28.3
Overall
dimensions
Length (from counterweight to suspension)
mm
3650
Width
1560
Height (to safety frame/cab)
2235
2530
Wheelbase
1810
Wheel tread
Front wheels
1263
Rear wheel
1200~1400
Ground
clearance
Minimum ground clearance
355 (Front axle)
Agricultural ground clearance
270 (Towing)
Engraving position
93