Warning: It is strictly prohibited to remove the connecting bolts between the tire, the drive hub and the
rim during inflation, otherwise it may fly out and hurt people.
The counterweight shall be increased or decreased based on the operating requirements of tractors. The
counterweight shall be added when there is need to increase the traction during dry field operations and
transportation operations; While the tractor is used in the mountainous and hilly land, the front counterweight
shall be increased appropriately to avoid "head tilting" during operation.
The rear counterweight is a circular iron casting with a mass of 31kg per piece. Two pieces can be installed
on the left and right sides respectively, with the gross mass of 124kg. Each piece of front counterweight is 10kg,
and 8 pieces of them can be installed, with the gross mass of 80kg.
Note: Before the rear wheel with rear counterweight is removed from the tractor, the rear
counterweight shall be removed from the tire first, so as to avoid casualties caused by instability.
To Next Page
Loading...
