EasyManua.ls Logo

Lovol TE Series - Add the Mark Position of Lubrication Points and the Description of Safety Filling Process

Lovol TE Series
121 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance Instructions
5.18 Exhaust of Fuel System
If the tractor is out of service for a long time or the diesel
filter element is being replaced,
and when the fuel tank is empty, air may enter the fuel pipeline.
The air in the fuel system will make it difficult to start the
engine. When the fuel tank is full and the oil circuit switch is in
the ON position, exhaust the air according to the following
steps:
Press exhaust valve A repeatedly until it can't be pressed
any more.
Fig. 5-21 Exhaust of Fuel System
Important: High-quality light diesel oil that meets the specifications must be used for engine.
Generally, 0# light diesel oil shall be used in summer and -10# light diesel oil in winter. Diesel oil
must be pure, and it must be precipitated and purified for at least 48h before use, otherwise it will affect the engine
service life.
5.19 Add the Mark Position of Lubrication Points and the Description of Safety Filling Process
86

Table of Contents

Related product manuals