Proper support of tractor
1. If the tractor or its components must be lifted, they shall be safely supported so as to lower the components or
appliances on the ground.
2. Do not support the machine with coal cinders, (hollow) bricks, hollow tiles or other supports that may fracture
under sustained pressure.
3. Do not work under a tractor supported by only one jack.
4. Before operating the jack, read and understand its Instruction Manual in detail. Overload is strictly prohibited.
It can only be used above the hard supporting surface to prevent personal injury or property damage.
5. During use, the jack can only be supported directly under the left and right axle shaft shells and front bracket of
the tractor rear axle, and other parts are not allowed to be supported.
Fig. 1-8 Position of jack support: 1. Front support 2. Left half axle housing 3. Right half axle housing
The cab has three exits, i.e. left door, right door and rear window. The rear window is used as an emergency
exit. In case of emergency, the driver opens the rear window by turning the rear window unlock handle clockwise
and escape from the cab.
In addition, in case of an emergency, the driver can break the glass with breaking tools and escape from the cab.
To Next Page
Loading...
