What to do if my Lowenstein Medical prismaAQUA switches off?
If your Lowenstein Medical Humidifier keeps switching off, it's likely because the humidifier is empty. To resolve this, simply fill the humidifier with water.
Why is my Lowenstein Medical prismaAQUA Humidifier leaking?
If your Lowenstein Medical Humidifier is leaking, it could be due to several reasons: * A faulty heater rod seal. In this case you should replace the seal. * Incorrectly inserted humidifier insert. Make sure to insert the humidifier insert correctly. * A faulty humidifier insert, which means you'll need to replace it. * Cracks in the lower part of the humidifier, requiring replacement of the lower part.
How to fix Lowenstein Medical prismaAQUA that does not warm up?
If your Lowenstein Medical Humidifier isn't warming up, there are a couple of potential reasons: * The humidifier stage might be switched off. Ensure you set the humidifier stage correctly. * The humidifier itself could be faulty. In this case, you should have the humidifier repaired.
General| Heated Breathing Tube | Yes |
|---|---|
| Preheating | Yes |
| Type | Heated Humidifier |
| Power Consumption | 60 W |
| Heating System | Integrated heated plate |
| Humidification Modes | Manual Humidification |
| Power Supply | 100 – 240 V AC, 50/60 Hz |
To Next Page
