LS Industrial Systems XBC-E Series - Writing a Ladder Logic Program

Chapter 2 Quick Start Guide
XBC E-Type Main Unit 2-2 Ver. 1
5. Next select the CPU Type according to the chart below.
2.3.2 Writing a Ladder Logic Program
1. Select the Normally Open Contact by clicking the icon in the top right of the XG5000 window
and click the first cell in the first rung of the NewProgram Window to place the contact.
Software CPU Type Selection
Corresponding PLC Series
XGB-XBCE
E Type
XGB-XBCS
SU Type
XGB-XBMH(V1)
H Type
XGB-XBCU
U Type