LS Industrial Systems XBC-E Series - 8.10 Memory Module

Chapter 8 Option Boards and Memory Module
XBC E-Type Main Unit 8-24 Ver. 1
8.10 Memory Module
You can save user program safely or download user program to PLC without special handling when user
program is damaged by using external memory module.
8.10.1 Memory module specification
Item XBO-M2MB Ref.
Memory capacity
2MByte
Memory type
Flash Memory
Specification
USB supported, Program Read/Write
Indicator LED
1. RUN
2. WRITE
3. READ
Operating mode setup
Mode setup by rotary switch
Operating power supply
RS-232C communication connecter,
USB connector
5V
Purpose
For moving
8.10.2 Memory module structure
Note
-.Memory module can be used for XGB (not supported for XGK/I/R)
-.Memory module is not supported at the version below
(XBMS: V2.5 or less, XBCH: V1.8 or less, XECH: V1.2 or less)
RS-232C connector
RUN LED
WRITE LED
READ LED
1 : READ mode
3 : WRITE mode
5 : PADT I/F mode
USB connector