Chapter 6 Instruction Details
XBC E-Type Main Unit 6-112 Ve r. 1
3) Error
(1) When R2I Instruction is used and S specified Single Real Number is out of -32,768~32,767 range,
operation error occurs.
(2) When R2D Instruction is used and S specified Single Real Number is out of -2,147,483,648~2,147,483,647
range, operation error occurs.
4) Program Example
(1) If Input signal P00000 is On, Real data ‘45688.8123’ is converted to Interger data of ‘45689’ in 2 Word
from P1100 to P1101.
R2D 45688.8123 P1100
P00000
To Next Page
Loading...
