Chapter 3 Installation and Wiring
XBC E-Type Main Unit 3-8 Ver. 1
2) If using on-board auxiliary DC24V supply of the main unit
a. Do not connect DC24V of several power supplies in parallel. It may cause the destruction of a
module.
b. If a power module exceeds the DC24V output capacity, supply DC24V externally as presented
below.
On-Board Power Supply Output
PLC Model
On-board
DC24V,
0.2A (4.8W)
CONTROL CIRCUIT USING ONBOARD POWER SUPPLY
ONTROL CIRCUIT USING EXTERNAL POWER SUPPLY
To Next Page
Loading...
