Chapter 3 Installation and Wiring
XBC E-Type Main Unit 3-17 Ver. 1
2. If using on-board DC24V supply of the main unit
a. Do not connect DC24V of multiple power supplies in parallel. Permanent damage to the
power supplies may occur.
b. On-board power supply of main unit is 24VDC, 0.2A, 4.8W.
c. If the power requirements of the internal 24VDC power supply are exceeded, use a
separate 24VDC power supply.
Control circuit using onboard power supply
Control circuit using external power supply
To Next Page
Loading...
