What does white smoke from my LS tractor indicate?
White exhaust smoke from your LS tractor could be caused by: * A clogged air cleaner: wash the element. * Engine oil exceeded: adjust to the proper level. * Lack of fuel supply: repair the fuel supply system.
Why does my LS tractor engine stop at low rpm?
If your LS tractor engine stops at low RPM, possible causes include: * Faulty high pressure pump: repair the pump. * Incorrect valve gap: adjust the gap. * Poor nozzle pressure: repair the nozzle.
What causes an LS tractor engine to exceed maximum speed?
If the engine of your LS tractor turns more than maximum speed, it may be due to: * Impurities in governor: repair the governor.
General| Brand | LS tractor |
|---|---|
| Model | MT573 |
| Category | Tractor |
| Language | English |
Warning about diesel engine exhaust exposure to California chemicals.
Explains emission control system warranty rights and obligations for 2021 engines.
Details parts and malfunctions not covered by the emission control system warranty.
Lists systems and parts covered by the emission control system warranty.
General information for tractor owners and manual usage.
Essential safety guidelines before operating the tractor.
Procedures for preparing the tractor for long-term storage.
Describes safety features like hood, fender, PTO covers, and ROPS.
Details the location and function of instrument panel and front controls.
Identifies and describes right-hand and left-hand controls.
Guidance on initial checks and procedures for new tractors.
Step-by-step instructions for starting and stopping the engine.
Procedures for driving, changing speed, and stopping the tractor.
Safety rules and procedures for transporting the tractor on roads.
Details about the Power Shuttle System, if fitted.
Safety precautions and operational details for the hydraulic system.
General information on lubrication, maintenance, and service intervals.
A chart detailing maintenance tasks and their intervals.
Recommended lubricants and their capacities for various tractor systems.
Specific maintenance checks required after the first 50 hours of operation.
Explains the meaning and action for various warning indicator lights.
Daily checks to perform before starting the tractor.
Procedures for field operations like hitching implements.
Information on tractor driving speeds and their implications.
Maintenance tasks that are required as needed.
Guidance on diagnosing and resolving common tractor issues.
Identifies components of the cabin's cooling and heating system.
Instructions for operating the air conditioner and heater.
Maintenance checks for the AC system every six months.
Annual maintenance checks for the AC system.
Procedures for using the cut-off valve when necessary.
Troubleshooting common problems with the air conditioning system.
Schematic diagram of the air conditioning system.
General information for tractor owners and manual usage.
Explanation of safety marks and symbols used in the manual.
Information on dealer services, parts, and warranty-related attention.
Note on product improvements and design changes.
Details the intended use and limitations of the tractor.
Warning against unauthorized modifications to safety devices.
Precautions for bystander safety during operation.
Adherence to local traffic rules when operating on roads.
Prohibition of riders on the tractor.
Tractor is designed for a single operator.
Staying clear of implements during operation.
Warning against bypassing tractor safety functions.
Emphasizes using genuine parts for maintenance.
Guidelines for cleaning the tractor with high-pressure water.
Maintenance and repair should be done by skilled technicians.
Caution regarding overhead power lines and hanging obstacles.
Prohibition of operation during electrical storms.
Disclaimer for damage or accidents caused by misuse.
Keeping the operator's manual for reference.
Describes the manual's content and scope.
Defines normal operation and operator requirements.
Outlines routine service and maintenance tasks.
Explains periodic service, conversions, and repair activities.
Details on rebuilding the tractor for specific conditions.
Restoring proper function after failure or degradation.
Pre-operation checks and dealer contact information.
Table of metric and imperial unit abbreviations.
Definitions of common acronyms used in the manual.
Location and importance of the tractor's Product Identification Number (PIN) plate.
Location of the engine's Product Identification Number (PIN) plate.
Location of the ROPS PIN plate.
Information on TM number and running hours displayed on the instrument panel.
Guidance on storing the operator's manual securely.
Defines left/right and front/rear views of the tractor.
Crucial safety notices and guidelines before operating the tractor.
Safety measures to protect children around the tractor.
Precautions regarding modification or replacement of lamps.
Importance of performing periodic lubrication and maintenance.
Emphasizes using genuine parts for maintenance.
Warning against arbitrary repairs and modifications.
Information on various protective structures and their modification limitations.
Details the level of protection offered by FOPS.
Protection levels against hazardous substances for cabin models.
Critical checks and procedures before starting the engine.
Information on start-safety interlock devices.
Importance of ventilation, especially in enclosed or hazardous areas.
Managing noise and vibration levels during operation.
Guidelines for using brake pedals, including latching them.
Advice on speed, turning, and avoiding sudden maneuvers.
How to avoid sudden starts or stops.
Regular cleaning of spraying areas and components.
Precautions for operating on slopes, including climbing and turning.
Caution regarding overhead power lines and hanging obstacles.
Prohibition of operation during electrical storms.
Obeying traffic rules and using SMV indicators.
Procedures for handling tractor failure or breakdown.
Precautions when working with hazardous materials and cabin filter use.
Operating beyond terrain limits may cause accidents.
Steering system behavior and maintenance on steep slopes.
Safe procedures for attaching and detaching implements.
Guidelines and precautions for towing the tractor.
Procedures for securely loading and transporting the tractor.
Safety checks and procedures after completing work on the tractor.
Safety precautions for handling diesel fuel, including fire hazards.
Steps to follow before leaving the tractor unattended.
Warning regarding toxic substances like diesel exhaust and battery handling.
Warning about preventing tractor instability.
Awareness of inclines and hills affecting tractor stability.
Data required to assess tractor stability, including weight and distances.
Defines constant parameters for stability calculations.
Calculation method for required front ballast.
Calculation method for required rear ballast.
Limits for front, rear, and total axle loads.
Minimizing environmental pollution and proper disposal of substances.
Proper recycling procedures for batteries.
Explanation of tractor symbols and their meanings.
Guidelines for handling, cleaning, and replacing safety decals.
Diagrams showing the location of safety decals on the tractor.
Location and content of various safety decals.
Location and content of further safety decals.
Location and content of additional safety decals.
Location and content of further safety decals.
Location and content of the seventeenth and eighteenth safety decals.
Location and content of the fifteenth to eighteenth safety decals.
Location and content of the nineteenth safety decal.
Location and importance of instructional decals on cabin models.
Location of instructional decals on the tractor.
Location of additional instructional decals on the tractor.
Steps for preparing the tractor for long-term storage.
Maintenance tasks to perform while the tractor is in storage.
Procedures for preparing the tractor after long-term storage.
Identification of tractor parts for cabin type models.
Instructions for safely boarding the tractor cabin.
Seat adjustment procedures for the standard seat type.
Seat adjustment procedures for the premium optional seat.
Additional optional seat adjustments.
Proper use and adjustment of the seat belt for safety.
How to adjust the tilt of the steering wheel.
Operation of the cabin ventilation system.
Procedures for exiting the cabin through the doors.
Using the rear window for emergency exit or ventilation.
Function and safety of the hood.
Function and safety of the fenders.
Importance of PTO safety covers and protection caps.
Safety features and warnings related to the cabin ROPS.
Overview of instrument panel and front control locations.
Detailed identification of all indicators and gauges on the instrument panel.
Function of the tachometer.
Operation of turn signal indicators and hazard lights.
Indicates when the parking brake is applied.
Indicates when the high beam headlights are on.
Optional indicator for unlatched brake pedals.
Indicates hydraulic oil filter pressure status.
Indicates when the differential lock is engaged.
Indicates when 4WD is engaged.
Optional indicator for quick turn function.
Optional indicator for 540E PTO operation.
Indicates when the PTO is in operation.
Indicator not used on this model.
Warns of engine coolant overheating.
Displays engine coolant temperature.
Optional indicators for power shuttle positions.
Multifunction display showing hour meter, error codes, battery voltage, etc.
Displays tire circumference and vehicle speed.
Shows the current fuel level in the tank.
Indicates the status of the battery charging system.
Warns when the fuel level is below minimum.
Indicates when the cold start aid device is active.
Indicates engine oil pressure status.
Warns of fuel filter restriction or water.
Indicates DPF regeneration process status.
Indicates when DPF regeneration is inhibited.
Indicates high exhaust gas temperature during DPF regeneration.
Indicates an error in the vehicle control system.
Indicates when ESC is ready.
Warns of significant errors in vehicle control.
Indicates when the air cleaner element needs service.
Indicates PTO speed and potential over-speed conditions.
Operation of the ignition key switch for starting and stopping.
Function and operation of the throttle pedal.
Use of the clutch pedal for starting, shifting, and stopping.
Operation of the synchro-shuttle lever for forward/reverse selection.
Proper use of brake pedals, including latching them.
Operation of the combination light switch for various lights.
How to activate and deactivate high beam headlights.
How to operate the tractor's horn.
Use of turn signal lights for road communication.
Use of hazard warning lights in emergency situations.
Operation of the front grille work lights.
Operation of the DPF switch for regeneration modes.
Defines components like DOC and DPF.
Explanation of the Diesel Oxidation Catalyst and Particulate Filter system.
Specifies recommended fuel and engine oil types.
Explains DPF regeneration indicator lights and their meanings.
Details the automatic DPF regeneration process.
How to delay or stop DPF regeneration manually.
Operation of the beacon lamp switch.
Operation of the 540E PTO switch.
Operation of the throttle lever for field speed control.
How to operate the main gear shift lever.
Operation of front and rear work lights.
Operation of front and rear window wipers and washers.
Use of the 12V power outlet socket.
Operation of the cabin's indoor light.
Information on the optional cabin audio player.
Operation of the 4WD engagement switch.
How to engage and disengage the parking brake lever.
Operation of the differential lock switch for slippery conditions.
Selecting between AUTO and MANUAL PTO modes.
Engaging and disengaging the PTO shaft.
Enabling and controlling the Engine Speed Cruise control (ESC) function.
Adjusting engine speed while ESC is active.
Selecting between different ESC modes.
Operation of the range gear shift lever for selecting speed ranges.
Engaging and disengaging the creeper speed gear.
Selecting PTO speed and operating the PTO shaft.
Use and folding instructions for the optional passenger seat.
Operation of the power shuttle lever for forward/reverse control.
Function and adjustment of the clutch pedal for PSS models.
Using the clutch button for main clutch engagement/disengagement.
Calibrating the power shuttle system oil pressure.
Adjusting the engaging speed of the power shuttle clutch.
Display and interpretation of error codes for the PSS.
Detailed list of SPN, FMI codes and their causes/solutions.
Critical safety measures for working with the hydraulic system.
Operation and notices for the hydraulic steering system.
Operation of position and draft control levers for MHL.
How draft control works to adjust implement depth.
Using position and draft control levers in combination.
Adjusting the down speed of the 3-point linkage.
Operation of remote control levers and quick couplers.
Operation of the joystick lever for front-end loader control.
Using auto lift control for implements.
Diagram of the Mechanical Hydraulic Lift (MHL) system.
Diagram of the Electro-Hydraulic Lift (EHL) system.
Initial checks and procedures for new tractors, including break-in.
Step-by-step instructions for starting the tractor engine.
Procedures for starting the engine in cold weather conditions.
Steps for safely stopping the tractor engine.
Importance of warming up the transmission fluid in cold weather.
Driving procedures for synchro-shuttle models.
Driving procedures for power-shuttle models.
How to change gears and speeds safely.
Procedures for performing an emergency stop.
Step-by-step guide for stopping the tractor.
Safe procedures for parking the tractor.
Proper handling of the turbocharger after operation.
Essential safety rules for road transport.
Guidelines for operating headlights, turn signals, and other lights.
Pin assignments and functions for the 7-pole trailer connector.
Safety precautions and methods for towing the tractor.
Securely loading and transporting the tractor.
Attaching and detaching rear implements using the 3-point linkage.
Installing and adjusting the upper link.
Adjusting the length of the lift rods.
Adjusting the stabilizer for lateral movement control.
Dimensions for implement installation.
Procedures for handling the 3-point linkage without implements.
Essential safety rules for PTO operation.
PTO shaft specifications and dimensions.
How to attach the PTO drive shaft safely.
Operating implements with high power requirements and slip clutches.
Procedures for changing the PTO shaft.
Use of hitch and drawbar for towed equipment.
Maximum permissible masses for towed equipment based on brake systems.
Maximum permissible mass on axles and total tractor mass.
Information on tire combinations, air pressure, and load capacities.
Adjusting wheel track and general tire replacement information.
Front wheel track dimensions for specific tire sizes.
Rear wheel track dimensions for specific tire sizes.
Safety guidelines for operating the front-end loader.
Instructions for connecting hydraulic hoses to the loader.
Mechanical attachment points for the front-end loader.
Procedures for checking and adjusting the tractor's steering angle.
Maximum capacities for various tractor implements.
Guidance on adding weights for traction and stability.
Limitations on tractor weighting for optimal performance.
Procedures for installing and removing front ballast weights.
Procedures for installing and removing rear ballast weights.
Protection levels against hazardous substances for cabin models.
Use and replacement of cabin air filters, especially charcoal filters.
Procedures for cleaning the cabin interior after pesticide work.
Tractor speed selection based on work, tires, and ground conditions.
Speed charts for synchro-shuttle models.
Speed charts for power shuttle models.
Importance of regular lubrication and maintenance schedules.
Table of tightening torques for various bolts and nuts.
Torque specifications for hydraulic fittings and tubes.
Requirements and recommendations for diesel fuel.
Use and benefits of diesel fuel conditioner.
Information on approved biodiesel blends and usage conditions.
Safe procedures for refueling the tractor with diesel fuel.
Procedures for changing engine coolant types.
How to safely open and close the tractor hood.
Locations for safely jacking the tractor.
Visual chart detailing maintenance tasks and intervals.
Table listing recommended lubricants, capacities, and standards.
Detailed list of maintenance tasks for the first 50 hours.
Procedure for draining water from the fuel filter.
Meaning and action for the engine oil pressure indicator.
Meaning and action for the battery charging indicator.
Daily checks to perform before starting the tractor.
Checking engine oil level and specification.
Fuel tank capacity, winter diesel use, and filling procedures.
Checking instrument panel indicators for normal operation.
Checking operation of lights and horn.
Precautions before checking engine coolant.
Procedures for cleaning the air cleaner filter element.
Steps for correctly reassembling the air cleaner filter element.
How to clean the radiator and screen for optimal cooling.
Checking tire air pressure and condition.
Importance of checking and tightening bolts and nuts to specified torque.
How to adjust clutch pedal play for synchro-shuttle and PSS models.
How to adjust brake pedal play and check brake distance.
Greasing points for steering, front axle, and 3-point linkage.
Routine cleaning of radiator and screen.
How to check transmission oil level.
How to check front axle oil level in center and final gear cases.
Procedures for checking battery status.
Maintenance of the dry type air cleaner.
Checking hydraulic hoses for leaks and damage.
How to clean and replace cabin air filters.
Checking and adding engine oil levels.
Steps for draining oil and replacing the oil filter.
Procedure for replacing the hydraulic oil filter.
Replacing the power shuttle oil filter on applicable models.
Checking and adding brake oil, including bleeding air.
How to adjust fan belt tension.
Checking and adjusting front wheel toe-in.
Checking and replacing the in-line pressure filter.
Procedures for cleaning the fuel tank.
Changing oil in the front axle center and final gear cases.
Procedure for changing transmission oil.
Replacing the pre-fuel filter and main fuel filter.
How to replace the cabin air filters.
Replacing the dry type air cleaner element.
Procedures for adjusting engine valve clearance.
Checking nozzle injection pressure.
Steps for checking, draining, and refilling engine coolant.
Periodic cleaning of major engine emission related parts by experts.
Periodic cleaning of major emission related parts by experts.
Procedures for bleeding air from the fuel system.
Air bleeding procedure after replacing the fuel filter.
Note that air bleeding from injection pipes is not required.
Air bleeding procedures for the brake system.
Air bleeding for the clutch line on synchro-shuttle models.
Location and replacement of fuses in the cabin fuse box.
Location and replacement of fuses in the chassis fuse box.
Location and importance of the main fuse.
How to check the battery state using the indicator.
Correct procedures for attaching and detaching the battery.
Safety precautions for charging the battery with a separate charger.
Instructions for connecting and removing jumper cables.
Checking the alternator and drive belt for proper function and tension.
Replacing rear and front turn signal light bulbs.
Replacing headlight bulbs.
Replacing grille work light bulbs.
Color specifications for touch-up paint repairs.
Common engine faults, causes, and solutions.
Further engine faults, causes, and solutions, including smoke color.
Common brake system faults, causes, and solutions.
Faults, causes, and solutions for the hydraulic lift system.
Common steering system faults, causes, and solutions.
Faults, causes, and solutions for the electric system.
Identifies components of the cabin's cooling and heating system.
Instructions for operating the air conditioner and heater controls.
Adjusting airflow direction using blower outlets and ventilation lever.
Checking refrigerant levels and contacting authorized service.
Cleaning the condenser and radiator screen for optimal performance.
Checking for refrigerant leaks by examining connecting parts.
Adjusting and checking the belt tension and pulley alignment.
Cleaning and replacing cabin air filters as per maintenance schedules.
Checking the compressor for oil leaks and abnormal noises.
Verifying that control panel switches operate correctly.
Procedures for disassembling and assembling air conditioner hose lines using cut-off valves.
Diagnosing and fixing issues with the fan motor.
Addressing low air volume problems in the AC system.
Diagnosing insufficient cooling/heating despite normal compressor operation.
Problems related to the compressor not turning or revolving.
Addressing problems with warm airflow not blowing.
Schematic diagram of the air conditioning and heating system.
Overall dimensions of the tractor cabin type.
Tractor weight details including cabin and bumper/front weight.
Engine model, type, displacement, compression, speed, torque, and power.
Fuel filter type and injection order.
Lubrication system pump and filter type.
Transmission type, clutch, and differential lock details.
PTO type, speed, and linkage details.
Hydraulic lift pump, rated flow, system pressure, and lift capacity.
Remote control lever types and coupler specifications.
Steering system type, oil, turning radius, and pressure.
Alternator output, battery voltage, capacity, and motor operation.
Specifications for headlights, turn signals, work lights, etc.
Standard tire sizes and wheel track dimensions.
Table of recommended lubricants, capacities, standards, and viscosities.
To Next Page