12
2.2
Selecting and Preparing a Site for Installation
Be careful so that the plastic parts of the inverter may not be damaged.
Do not move the product holding the cover only.
Do not install the product where there is vibration, a press or cart..
Life of the inverter greatly influenced by the surrounding temperatures, make sure that the
surrounding temperature does not exceed the permitted temperature (-10 ~ 50 C).
The life of the inverter is affected by ambient temperature. Place that inverter installed in of
ambient temperatures should not exceed the following allowable temperature.
When the inverter is installed inside the panel, panel temperature must not exceed the
following allowable temperature. In other word, the ambient temperature inside or outside of
the panel, regardless of the installation, needs a 5cm gap around the inverter as shown.
<Measurement Points of Surrounding Temperature>
Allowable Temperature
Characteristics, such as no ice in
ambient Temperature
CT(Heavy Duty) load: - 10 ~ 50
℃
VT(Normal Duty)load: - 10~ 40
℃
(However, VT(Normal Duty) in 50
℃
,
less than 80% of the load use
recommended)
IP54 Product : -10 ~40
℃
To Next Page
Loading...
Need help?
General
