LSIS SV-iS7 series - Failure Status Monitoring

59
3.2.9 Failure status monitoring
1) Failure during operation
- In case of a failure during operation, the
mode automatically shifts to Trip Mode and
the type of the current failure is displayed.
- If you press Down key, the output
frequency, current and operating status are
displayed relating to the time that the failure
occurred.
- If the failure status is terminated by Reset,
the keypad values prior to the failure are
again displayed.
2) Multiple failures at a time
- In case of multiple failures, the number of
failures is displayed next to the failure type.
- Press PROG.