5
1 Introduction
1.1
Purpose of the Manual
This instruction manual provides information for safe installation, and commissioning of the
SV-IS7 Series..
Read and follow the instruction manual in order to use the IS7 drive safely and
professionally, and pay particular attention to the safety instructions and general warnings.
Keep this instruction manual available with the IS7 drive at all times.
Note
Detailed informations for each parameter is on technical manual.
1.2
Intended Use
The inverter is an electronic motor controller that :
1. Regulates motor speed in response to system feedback or to remote commands from
external controllers. A power drive system consists of the IS7 inverter, the motor and
equipment driven by the motor.
2. Monitors aspects of system and motor status.
3. Can be used for motor protection.
Depending on configuration, the inverter can be used in standalone applications or form
part of a larger appliance or installation.
The inverter is intended for use in residential, industrial and commercial environments in
accordance with local laws and standards. Do not use the inverter in applications that do
not comply with specified designated operating conditions and environments.
To Next Page
Loading...
Need help?
General
