LSIS SV-iS7 series Manual

55
- This is the initial display of Parameter Mode.
- Press Down key.
- You have shifted to 01 frequency setting code.
- Press PROG.
- The cursor flashes so that you can enter the
desired operating frequency.
- If you want to set the frequency at 10Hz, move the
cursor to the desired place using Left/Right keys.
- Enter 10Hz using Up key and press PROG.
- The desired frequency has been changed to 10Hz.

LSIS SV-iS7 series Specifications

General

Brand	LSIS
Model	SV-iS7 series
Category	Inverter
Language	English