LSIS XGL-EFMT - Error Code

Chapter 10 Troubleshooting
10-6
10.2.2 Error code
It is brief and can monitor a communication module error through XG5000.
Click [Onlie] -> [Communication module setting] -> [System diagnosis[]
Right click FEnet module -> [Status by service] -> [P2P Service]
When you use the E-mail service, please perform reference of E-mail error code.
Error type
Error code
Description
P2P
0x0001 Modbus receive frame error
0x0002 Modbus size error
0x0005
Timeout error
0x0006 Disconnect error
0x0010 Parameter download error
0x0013 Parameter structure error
0x0015 P2P Event send error
0x0016 P2P Event receive error
0x0017 P2P connection error
0x0051 Channel connection overflow
0x0062 Channel setting error
0x00F0 Internal buffer allotment error
0xFF00 User defined data send error(user defined frame)
0xFF01 User defined frame event receive error
0xFFD7 Internal data send overflow
0xFFEB Internal interlock error
0xFFFF
When it request connection for server setting, User defined send frame size
error
E-mail
0x0001 Email address error
0x0002 Email file
0x0003 Email server login error
0x0005 Email send error
0x0007 Email Disable
0x5D52 Email download error
0xFFCE Internal send buffer timeout error
0xFFD6 Internal send buffer reset error
0xFFD9 Internal send buffer delete error
0xFFEA Internal send buffer size error
0xFFE8 Internal send buffer interlock error
0xFFF1 Internal send buffer pointer error
0xFFF2 Internal send buffer error