Chapter 6 High-speed Link Service
6-5
6.4.2 Standard settings (Module)
(1) Setting the communication module
Communication module setting can be registered via off-line or Online.
Refer to Chapter 5 XG5000 program for more details.
(2) Downloading standard settings
Select [Online] - [Write] to open the ‘Write parameter’ window of [Fig. 6.4.2]. Check applicable
standard settings and click [OK] button.
After standard settings are downloaded, surely let PLC power turn off and on or reset. If the
communication module is not reset, the new communication parameters information will not be
applied.
[Fig. 6.4.2] Write Parameter window
To Next Page
Loading...
