PARTNER MAIL Administration
Modifying the Main Menus
If you want to change the Selector Codes and Selector Code Actions that play for a
main menu, update form 5 or 6 then use the following instructions.
1. Access the Administration Main Menu as described in an earlier section.
The system plays the system programming options.
2.
Press [
3
] for Automated Attendant.
The Automated Attendant Administration Menu plays.
3.
Choose:
—
Press [
1
] to select the Day Main Menu.
The Menu Definition Options play.
—
Press [
2
] to select the Night Main Menu.
The Menu Definition Options play.
4.
Press [
6
] to modify the main menu.
The system prompts you to specify the Selector Code.
5.
Enter a Selector Code [
1
] through [
9
].
—
If the Selector Code is already assigned, the system asks you to press
[
9
] to confirm that you want to modify it.
— If the Selector Code is unassigned, the system prompts you to:
Enter an Action.
Changing the Main Menus 6-19
To Next Page
Loading...