Lucent Technologies PARTNER MAIL - Mounting the PARTNER MAIL Unit

Installation
Remounting the PARTNER MAIL Unit
1.
Mount the unit by inserting the PARTNER MAIL system bracket lip into the
bracket slot on the wall-mount (Figure 2-3, Figure 2-13).
Wall
PARTNER MAIL
Cabinet
Slot
Cable
Manager
Wall Mount
and Cable
Manager
Bracket
Wood
Mounting
Surface
Retaining
Bracket
PARTNER MAIL
Bracket
Captive
Mounting hole for
Retaining
Captive Retaining Screw
Screw
Figure 2-13. Mounting the PARTNER MAIL Unit
2.
Tighten the captive retaining screw on the wall mount.
3.
Refer to PARTNER II Release 3 Planning Form B1, and locate the extension
jack numbers for the PARTNER MAIL system modular cords.
2-18 Add or Replace Voice-Processing Card