Installation
Mounting the PARTNER MAIL Unit
1.
Remove the bracket from the shipment package.
2.
Use the bracket as a template to mark the points on the wood surface where
you will insert the wall-mounting screws. Position the bracket on the surface
so that the slot is upward (Figure 2-2).
WARNING:
Be sure to install the wall-mounting screws in wall studs or in a piece of
plywood to ensure permanent mounting and to prevent wall damage.
Wall
Slot
Wood
Cable
Mounting
Manager
Surface
Wall Mount
and Cable
Manager
Bracket
Figure 2-2. Wall-Mounting the PARTNER MAIL Unit
3.
Secure the bracket onto the surface using the four #8 screws provided.
Installing the PARTNER MAIL Unit
2-5
To Next Page
Loading...