Lucent Technologies PARTNER MAIL - Page 39

Installation
4.
Loosen the captive retaining screw (Figure 2-8).
5.
Carefully lift the unit up and out of the bracket, and place it on a sturdy flat
tabletop (Figure 2-8).
Cover screws
Lift up
and out
Loosen retaining
Cover screws
screw
Figure 2-8. Remove Unit from Wall-mount
6. Remove the four screws located on the right and left sides of the PARTNER
MAIL unit.
7. Remove the cover.
Add or Replace Voice-Processing Card
2-13