PARTNER MAIL - Initial Programming
Accessing the Administration Main Menu
Use the following procedure to access the PARTNER MAIL system Administration
Main menu.
1.
2.
3.
4.
Press
[
Intercom
]
[
7
] [
7
] [
7
] or a preprogrammed button.
Enter the System Administrator's
MAlLBOX
(initially [
9
] [
9
] [
9
] [
7
]) and press
[
#
].
Enter the System Administrator’s
PASSWORD
(initially [
1
] [
2
] [
3
] [
4
]) and press
[
#
].
— The system plays the seven items on the the Voice Mail Menu
(Figure 4-1).
— The system does not play menu item 9, the Administration Menu. The
System Administrator is the only subscriber who can select the “hidden”
menu option 9 from the Voice Mail Menu.
Press [
9
] to program.
The system plays the system programming options.
Refer to Appendix A for a list of all factory settings. You should confirm a factory
setting, as instructed, even if you are not changing the setting.
Programming Hints
■
You do not need to wait for a prompt before proceeding to the next step if you
are experienced with PARTNER MAIL system programming.
■
Press [
✱
] [
#
] to return to the previous menu.
■
Press [
✱
] [
4
] to repeat the current menu options.
■
Press [
✱
] [
7
] to return to the System Administration Menu.
■
Press [
✱
] [
✱
] [
9
] to exit from the PARTNER MAIL system.
■
To avoid background noise, speak into the handset to record names,
greetings, and announcements instead of using the speakerphone.
4-4 Introduction to Programming
To Next Page
Loading...
Need help?
General