Page 30 of 60
Tip 1: Pick a wheel base position.
The legs of the Wheel Base allow for multiple ways of usage depending on personal spatial preference. It is
recommended that the user chooses the position that is most comfortable to him/her. The inner tube as well
as the camera head can be turned independently from the rest of the vertical stand. This allows the
adjustment of the wheel base without restraint from other parts of the device.
Tip 2: Consider the location of peripheral devices.
It is recommended that the user consider the layout of the room and the location of equipment that will be
attached to the colposcope. Depending on the location of such devices, the power box should be positioned
in a way to allow the connecter panel to face the devices. This will cause less tension to the attached cords
and provide a smoother and more comfortable feel during use.
To Next Page
Loading...
