Page 41 of 60
Chapter 6: Lutech Viewer
The Lutech Viewer is a viewing software that can stream live video from your Lutech colposcope as well as
other video enabled devices onto your computer screen. The Lutech Viewer will allow you to save pictures
and videos from the streaming graphics in a location on your computer of your choosing for future reference.
6.1 Safety Safety Terminology
6.1.1 WARNING
• Please read the User Manual for the Lutech Viewer completely before starting use.
• Please note that the Lutech Viewer does not contain encryption and cannot be used to reliably and safely
store or transfer pictures or videos if secure or encrypted transfer and storage are required.
• If the Lutech Viewer is used for medical exams, the healthcare professional in charge of the medical exam
must have procedures in place to safely store or transfer patient data in compliance with the healthcare
regulations of that territory.
• The Lutech Viewer is not locked and there are no sign in options. Therefore, if using for medical purposes,
please only install it where patient data can be protected and where it is only accessible to trained and
authorized medical personnel.
• The Lutech Viewer will work with Lutech colposcopes but may also work with a variety of other video
devices. Lutech makes no claim or guarantees that it will work with any specific video device. User may
choose to use the Lutech Viewer at their own discretion.
• Other viewers or media software will work to capture pictures and videos from the Lutech colposcopes. If
the intention is to find a software to use with the Lutech colposcope, please consult with your facilities
engineer to establish which software is most appropriate for your needs while protecting patient privacy and
the facility’s security infrastructure.
6.1.2 NOTE
• The Lutech Viewer cannot load previously saved pictures or videos.
• The Lutech Viewer does not store any historical data, images or files. All files are saved within a folder in a
location on the computer or server of the user’s choosing at the end of the session. The user is ultimately
responsible for the safe transfer, storage and processing of these files.
• The Lutech Viewer cannot play any video. Video playback uses the default video player within the computer.
• Be sure to have the colposcope turned on and connected to the computer before launching the software.
• The Lutech Viewer software version may be updated without notice.
6.1.3 Copyright
Copyright © 2020 by Lutech Industries, Inc.
All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner
whatsoever without the express written permission of the Lutech Industries, Inc.
6.2 Installation
The Lutech Viewer is a free viewer that comes with the Lutech Colposcope. It is loaded onto a USB stick
and can be found within the colposcope box. If there is no USB stick within the colposcope box, please
contact Lutech for assistance.
Lutech Industries, Inc.
1 (631) 676-7432
service@lutechmedical.com
6.2.1 Computer Specification Requirements
To Next Page
Loading...
