Page 55 of 60
NOTE:
• Please dispose of old batteries per local requirements.
• Do not use or place the batteries near a heat source.
• Only authorized and trained personnel may remove the battery.
7.5 Transportation
When transporting the colposcope, avoid external weather conditions. If necessary, dismantle the
colposcope and place in original packaging for transport. Use environmental conditions suggested for
storage while transporting the colposcope. If transporting the colposcope in a moving vehicle, please lock
the colposcope in place to prevent movement of any kind. Do not rely solely on the caster locks.
WARNING: The caster locks on the wheel base are not enough to keep the colposcope from moving during
transportation. Use alternate methods to immobilize the colposcope during transportation for the safety of
the equipment and personnel.
7.6 Device Disposal
To avoid environmental contamination when discarding the device, the user should clean it according to the
cleaning procedures contained herein and then dispose of it according to the regulations as set forth in the
jurisdiction of the devices location.
Do not discard electrical devices as normal waste. They should be collected separately for recycling.
To Next Page
Loading...
