Lutech LT-300 SD - Tips and Suggestions

Page 29 of 60
Diagram 2.6.2-4
The rest of the ring is already attached to the power box.
Diagram 2.6.2-5
Take the power box and place it on the vertical stand.
Diagram 2.6.2-6
Use the screws provided to join the semi circles and attach the
power box to the vertical tube.
Diagram 2.6.2-7
2.7 Tips and Suggestions
The vertical stand is designed to allow multiple users to maneuver it to their individual comfort zone. For
optimal comfort and ergonomics, try some of the tips below.