BW437-RTU Quick Guide
Disclaimer
Please read this manual before proceeding to install this controller or any other Onyxx LX device.
This manual applies to
Onyxx LX UI
software
version
4.0
and higher and using
firmware
version
1.
058 and higher.
All firmware updates must be done utilizing Supplied USB-COM adapter or USB to MSTP converter cable.
Installations shall be made by a properly certified technician and respect all local mandatory codes and regulations.
Electronic controls are static sensitive devices: discharge yourself properly before manipulating and installing a controller.
Any short circuit or incorrect wiring may permanently damage the controller or the controlled equipment.
Double check all wiring before applying power.
If a control failure could lead to personal injury and/or loss of property, it becomes the responsibility of the installer to
add safety devices and/or alarm system to protect against failures.
www.lynxspring.com
To Next Page
Loading...
Need help?
General
