Need help?Do you have a question about the Lynxspring JENEsys Edge 534 and is the answer not in the manual?
General| Model | JENEsys Edge 534 |
|---|---|
| Category | Controller |
| Connectivity | Ethernet, USB, Serial, Wireless |
| USB Ports | 2 x USB 2.0 |
| Input/Output | Digital and Analog I/O |
| Memory | 1GB DDR3 |
| Ethernet Ports | 2 |
| Serial Ports | 2 |
| Wireless Connectivity | Wi-Fi, Bluetooth |
| Power Supply | 24V DC |
| Operating Temperature | -20°C to 60°C |
| Operating System | Linux |
Procedures to use the onyxxDriver for Onyxx Proxy Points and station interface.
Steps to add and configure the onyxxNetwork under the station's Drivers container.
Process to discover and add Onyxx Devices to the station's database.
Procedures to create Onyxx Proxy points using the Onyxx Driver Point Manager.
Details the hierarchical component structure of the Onyxx Network driver.
Categorizes Onyxx Device properties into device status and configuration.
Describes the Onyxx Point Manager for discovering and adding I/O terminal points.
Details fields available in the Add dialog for Onyxx Proxy points.
Explains universal input terminals and default output types for points.
Lists the 7 different onyxxDriver point types and their control point categories.
Explains common properties found in each Onyxx Proxy extension.
Details various conversion types for Onyxx Driver Proxy points, including Linear and Tabular.
Explains the Linear Calibration Ext slot for calibrating calculated values.
Covers Boolean input/output and Counter input points for digital and pulse signals.
Details Resistive and Thermistor input points for sensor data, including calibration.
Instructions for importing and exporting custom thermistor or non-linear curve files.
Covers Voltage points and Mini USB port access for device connectivity.
Explains N Device Manager and Onyxx Driver Point Manager views for managing devices and points.
Provides guidance on platform connection, Onyxx network, and communication problems.
To Next Page
