www.lynxspring.com
®
USER GUIDE
Lee’s Summit, MO 64086
sales@lynxspring.com
All Rights Reserved
Revised 2/1/2019
JENE-EG534-V2
Page 30 of 31
N Device Manager
The N Device Manager is a view on the onyxxDriver Network that allows a user to add, edit, and access Onyxx Devices
that represent physical modules of I/O on the host JENEsys Edge.
Tables in the N Device Manager view have the following columns:
• Name - Component name of the I/O board
• Type - Niagara type (currently, only Onyxx Device)
• Exts - Shortcut to the device extensions (only one extension -- Points)
• Status - Current status of the I/O board
• Device Path - Defines the virtual file path that represents a device
For more details, see “N Device Manager” on page 11.
Onyxx Driver Point Manager
The onyxxDriverPointManager is the default view on the onyxxPointDeviceExt, and is used to add, edit, and access Onyxx
Proxy points on either of these components.
Tables in the onyxxDriverPointManager view have the following columns:
• Name - Component name of the Onyxx Proxy point
• Type - Onyxx point type of the configured point
• Port Address - Hardware I/O address of the point
• Poll Frequency - How often the point will be polled
• Conversion - The Conversion applied to the point
• Point Type - Onyxx Proxy Extension Type of the configured point
• Address - Hardware I/O address of the point
• Out - Current value of the point
• Facets - Defined point facets
For more details, see “Onyxx Point Manager” on page 13.
To Next Page
Loading...
