MA lighting Lightcommander 12/2 - MIDI Format and MIDI Commands

MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
.
Fax: +49 931 4979429
.
www.malighting.de
2626
2626
26
MIDI Format and MIDI Commands
Î MIDI exclusively deals with Controller Commands. In the MIDI menu two differ-
ent sets of controller commands can be activated. Press Shift button within the
MIDI menu.
• While MIDI OUT is turned on, all fader settings (Masters), memory buttons, the
page and Chaser Program Numbers will be transferred, to initiate MIDI.
• While MIDI IN is turned on or off, each internally activated Memory, the Chaser
and Insert Fades will be removed.
• When MIDI IN is turned on, the Main Master, the Preset-A and -B master will
be turned to 100 %. The chaser master is set to 0 %.
Î Commands:
The Status Byte to be transferred is always the Control Change Command.
= 1011nnnn (Bn hex) (nnnn=MIDI Channel).
Hence, two Data bytes are following:
Name: 1. 2. Data byte:
Memory Fader 1 00 (102) +00-127 (Fader level)
Memory Fader 2 01 (103) +00-127 (Fader level)
Memory Fader X XX (XX) +...........
Memory Fader 12 11 (113) +00-127 (Fader level)
Main Master Fader 17 (119) +00-127 (Fader level)
Preset A Master 18 (120) +00-127 (Fader level)
Preset B Master 19 (52) +00-127 (Fader level)
Chaser Master 20 (53) +00-127 (Fader level)
Memory button 5-8 23 (54) +08=Mem5 04=Mem6 02=Mem7 01=Mem8
Memory button 1-4 24 (55) +08=Mem1 04=Mem2 02=Mem3 01=Mem4
Memory button 9-12 26 (57) +08=Mem9 04=Mem10 02=Mem11 01=Mem12
Page 0-9 27 (58) +00-09 (Page 0 9)
Solo Function 28 (59) +16=Channel Flash 08=Zero
+04=Memory Flash 02=Preset B Flash
+01=Preset A Flash
Chaser Start (+No.) 32 (63) +00-98 (Chaser number)
Chaser Step button 33 (20) +00-XX (value doesn´t matter)
Preset Mode ON 48 (29) +00-XX (value doesn´t matter)
X-Fader 49 (30) +00-127 (Fader level)
X-Fade Insert 50 (31) +00 = ON, 00 = OFF (unequal zero)
X-Fade Manual 51 (84) +00 = ON, 00 = OFF (unequal zero)
Preset Flash buttons 52 (85) +04=Preset A 02=Preset B 01=Zero
Sound to Light Mode 53 (86) +00 = ON, 00 = OFF (unequal zero)
Sound to Light Pause 54 (87) +00-127 (Fader level)
Sound to Light Bass 55 (88) +00-127 (Fader level)
Sound to Light Mid 56 (89) +00-127 (Fader level)
Sound to Light Treble 57 (90) +00-127 (Fader level)
Chaser Speed Fader 58 (70) +00-127 (Fader level)
Chaser Mode 59 (71) +00 = Sound, 01 = Run, 02 = Manual
Numbers in brackets are the values for the second controller set.