Lightcommander Lightcommander
Lightcommander Lightcommander
Lightcommander
11
11
1
2/22/2
2/22/2
2/2
eMail: info@malighting.de
.
Tel.: +49 931 497940
.
User's Manual Lightcommander 12/2
77
77
7
9. The Encoder wheel
Selections e.g. Chaser programs or settings of menu modifiers are
performed via the big wheel above the Quit button.
10. Soft Buttons and Quit
Both soft buttons are selecting displayed functions.
Quit cancels each function and switches back to Top-Menu.
11. The Chaser Section
Chase steps may run as Auto-Steps (Speed), Sound-Steps (Sound In),
or Manual-Steps (Step Button / Manual X Fade).
12. Chaser Mode Buttons
You may preselect how a Chase step will be performed.
13. The Master Section
Preset-A-Master sets maximum output level for all Preset-A-Channels.
(Preset -B-) Memory-B-Master sets max. output level for Memory masters.
MAIN Master sets maximum output level for the entire desk.
Chaser Master sets maximum output level for Chase steps.
14. Page Button
12 Memory cues are available within each of 10 pages (Page 0-9).
15. Sound to Light / Chase to Memory
Sound and Chaser effects are controlled in this section.
A detailed description follows later in this manual.
Notes:
• We reserve the right to alter functions without prior notice.
• The Lightcommander is designed for use as a lighting control desk only.
• All described playback functions can be used together and offer
high demanding possibilities in lighting design.
• First, familiarize yourself with a function, than go on.
TOP MENU
Î TOP-MENU: Appears after switching on the desk.
• The preselected Chaser program in on display.
• In the lower line HOLD, LIVE and UPPER are
indicated to be active, if selected.
About this manual
CHASE : 01 STEP : 10
> HOLD <
To Next Page
Loading...
