Mackie Digital 8 BUS User Manual

6-29
O w n e r ’ s M a n u a l
Starting a New Session
2. Press the EQ button and the ON button
in the Fat Channel Section.
3. Press the SOLO button on the selected
channel if desired. Now you hear just
that channel in the Control Room output.
TO SELECT THE EQ
From the screen:
1. Select the channel you want to EQ by
clicking on its SELECT button.
2. Click on the EQ button near the top of
the channel strip.
3. To use the graphic view, click on the
EQ button in the lower menu bar (or
double-click in the small graphic view
below the EQ button). The EQ control
panel opens. This also has an ON/OFF
button.
4. Click on the SOLO button on the se-
lected channel if desired. Now you hear
just that channel in the Control Room
output.
Changing the Gain Setting
TO CHANGE THE GAIN SETTING
From the console:
1. Rotate the V-Pot beneath the desired
band clockwise to boost the gain by up
to 15 dB, and rotate it counterclock-
wise to cut the gain by up to 15 dB.
The gain is adjustable in approximately
0.25 dB increments.
Note: You can also use “Next” to have the
VFD display each EQ band’s gain, Frequency,
and Q.
ON
LOWPREVIOUS
SELECT
LOW MID HI MID
EQ
COMPRESSORGATE
PLUG-INS
LOAD PATCH
SAVE PATCH
SETUP
MEMORY A
MEMORY B
HI NEXT
SELECT SELECT
SELECT HELP
SUPER CD ENCODING
ON
LOWPREVIOUS
SELECT
LOW MID HI MID
EQ
COMPRESSORGATE
PLUG-INS
LOAD PATCH
SAVE PATCH
SETUP
MEMORY A
MEMORY B
HI NEXT
SELECT SELECT
SELECT HELP
SUPER CD ENCODING
56 INPUT / 72 CHANNEL DIGITAL MIXER
D8B
GAIN GAIN GAIN GAIN
12.0 DB 0.0 DB 0.0 DB 0.0 DB

Mackie Digital 8 BUS Specifications

General

Brand	Mackie
Model	Digital 8 BUS
Category	Music Mixer
Language	English