6-42
D i g i t a l 8 • B u s
Starting a New Session
TO LOAD A COMPRESSOR PATCH
From the console:
1. With COMPRESSOR selected for chan-
nel processing, press the SELECT
button on the channel you want to load
with the compressor file. Press and
hold the SHIFT button in the Master
V-Pot Section to select more than one
channel.
2. Press MEMORY A or MEMORY B to
choose the memory location to which
you want to load the file.
3. Press LOAD PATCH in the Fat Chan-
nel Section.
4. The Fat Channel Display shows the
first compressor file (in alphabetical or-
der) in the Compressors folder. Press
the SELECT buttons below the arrows
to scroll through the stored Compres-
sor files.
5. When the one you want appears in the
display, press the SELECT button be-
low OK to complete the operation.
TO LOAD A COMPRESSOR PATCH
From the screen:
1. Click on the SELECT button of the
channel you want to load with the
compressor file. Press and hold the
SHIFT key to select more than one
channel.
2. Click on MEM A or MEM B to choose
the memory location to which you
want to load the file.
3. Click and hold on the MENU button in
the COMPRESSOR control panel.
4. Drag down to “Open Compressor...”
The “Compressor Files...” dialog box
appears.
ON
LOWPREVIOUS
SELECT
LOW MID HI MID
EQ
COMPRESSORGATE
PLUG-INS
LOAD PATCH
SAVE PATCH
SETUP
MEMORY A
MEMORY B
HI NEXT
SELECT SELECT
SELECT HELP
SUPER CD ENCODING
56 INPUT / 72 CHANNEL DIGITAL MIXER
D8B
comp#1 (LOAD Compressor)
<< Scan >> Cancel OK
To Next Page
Loading...
Need help?
General
