MACROMEDIA FLASH 8-FLASH LITE 2.X ACTIONSCRIPT LANGUAGE - Quit Fscommand2 Command; Resetsoftkeys Fscommand2 Command

fscommand2 Commands 239
Quit fscommand2 Command
Quit
Causes the Flash Lite player to stop playback and exit.
This command is supported only when Flash Lite is running in stand-alone mode. It is not
supported when the player is running in the context of another application (for example, as a
plug-in to a browser).
Availability: ActionScript 1.0; Flash Lite 1.1
Example
The following example causes Flash Lite to stop playback and quit when running in stand-
alone mode:
status = fscommand2("Quit");
ResetSoftKeys fscommand2 Command
ResetSoftKeys
Resets the soft keys to their original settings.
This command is supported only when Flash Lite is running in stand-alone mode. It is not
supported when the player is running in the context of another application (for example, as a
plug-in to a browser).
Availability: ActionScript 1.0; Flash Lite 1.1
Example
The following statement resets the soft keys to their original settings:
status = fscommand2("ResetSoftKeys");
Command Parameters Value Returned
Quit None -1: Not supported.
Command Parameters Value Returned
ResetSoftKeys None -1: Not supported.