Magnet-physik EF 14 - Measuring Modes

Electronic Fluxmeter EF 14
BA
–
no.: 100514EBA02
December 9
th
, 2020
Page
42
6.3.2 Measuring Modes
MODE AC or DC mode
Write: #MODE 0 for AC
#MODE 1 for DC
Answer: MODE n n = 0, 1
Read: ?MODE
Answer: MODE n n = 0, 1
MAX Max./Min. function
Write: #MAX 0 disables the function
#MAX 1 enables the display of the maximum
#MAX 2 enables the display of maximum, minimum and
difference (available only in DC mode)
Answer: MAX n n = 0, 1, 2
Read: ?MAX
Answer: MAX n n = 0, 1, 2
MMAX Request of maximum value
Read: ?MMAX
Answer: value unit
The command returns an answer only if the Max./Min. function is enabled.
MMIN Request of minimum value, available only in DC mode
Read: ?MMIN
Answer: value unit
The command returns an answer only if the display of maximum, minimum
and difference is enabled.
MDELTA Request of the difference between maximum and minimum values, available
only in DC mode
Read: ?MDELTA
Answer: value unit
The command returns an answer only if the display of maximum, minimum
and difference is enabled.
PEAK Enable or disable the Peak function
Write: #PEAK 0 disable the function
#PEAK 1 enable the function
Answer: PEAK n n = 0, 1
Read: ?PEAK