Flex 8EX / 12EX EU System Instruction Manual
March 2018
Page 13 of 66
2.10 Specific System Warnings
Below are some specific operating safety tips that should be strictly followed when operating a Flex EX
system:
• Check the Status LED on the transmitter for any signs of low battery power (see Section 7.2 on
page 62).
• Check the Status LED on the transmitter for any signs of irregularities (see Section 7.2 on
page 62).
• Make sure the system is not set to the same channel as any other Flex systems in use within a
distance of 300 meters (900 feet).
• Never operate a crane or equipment with two transmitter handsets at the same time unless they
are programmed to do so.
To Next Page
Loading...
