Magnetek flex 8ex - Declaration of Conformity

Flex 8EX / 12EX EU System Instruction Manual
March 2018
Page 66 of 66
9 Declaration of Conformity
EU Declaraon of Conformity Cerficate
For the following equipment:
Product : Flex Series Radio Remote Control
Mulple Listee Model No. : Flex 4ES/EX/EM, Flex 6EX, Flex 8ES/EX/EM, Flex 12ES/EX/EM, Flex 8/12 PRO
Product Receiver Models : CAN-2, MHR, WIC-2402, Flex 4 RX, Flex 6 RX, Flex 8R X, Flex 12 RX
Transmier Model Serial Number :
Receiver Model Seral Number :
Manufacturer’s Name : Magnetek, Inc.
Manufacturer’s Address : N49 W13650 Campbell Drive
Menomonee Falls, WI 53051 USA
The undersigned hereby declares on behalf of Magnetek, that the above-referenced products, to which this declaraon relates, is in
conformity with the provisions of CE Mark Direcve (93/68/EEC), Machinery Safety Direcve (MD) 2006/42/EC, and Radio
Equipment Direcve (RE-D) 1999/5/EC.
The standards relevant for the evaluaon of the product referenced above conformity to the direcve requirements are as
follows:
EN 301 489-1
EN 301 489-3
EN 300 220-2
EN 60204-1
EN 60204-32
EN 60950-1
EN 60529
EN ISO 13849-1
EN 13557
The European contact for Magnetek is: Brian Preston
Magnetek
Unit 3, Bedford Business Centre
Mile Road
Bedford
MK42 9TW
United Kingdom
Per Annex II.B of the Machinery Direcve (2006/42/EC):
The machinery, product, assembly or sub-assembly covered by this Declaraon of Conformity must not be put into service unl the
machinery into which it is to be incorporated has been declared in conformity with the provisions of the applicable Direcve(s). This
statement is only necessary where the product is to be incorporated into a machine or system (e.g. a safety component).
Signature of Authorized Person:
Ben Stoller / Director - Radio Controls
For Magnetek, Inc.
Menomonee Falls, WI USA
December 19, 2017
Date of Issuance
B
S
ll
/
D
i
R
d
i
C