Flex 8EX / 12EX EU System Instruction Manual
March 2018
Page 55 of 66
6.2 Pre-installation Precautions
1. Make sure the transmitter and the receiver have identical serial number/ID codes and
channels.
2. Make sure the receiver is not set to the same channel as any other systems in use in the
surrounding area.
3. Make sure that the crane or equipment is working properly prior to installation.
4. Make sure the power source to the receiver is set correctly.
5. Switch off the main power source to the crane or equipment prior to installation.
6.3 Step-by-Step Installation
Fig. 27
To Next Page
Loading...
