IMPULSE
®
•Link 5 Instruction Manual
April 2020
Page 12 of 47
4.2. Parameters/DataLogger Tab
The Parameter and DataLogger tabs allow the opening, closing, and printing of parameters, DataLogger files, or
Trend files. The DataLogger Tab is the default tab when a DataLogger is connected.
4.2.1. Parameter Tab
Figure 4: The Parameter Tab
New – Create a Parameter file
Open – Open a Parameter, DataLogger, or Trend file
Close – Close an active Parameter, DataLogger, or Trend file
Print – Print the active view (Ctrl-P)
Tool buttons also provide the following functions:
Compare – Allows comparison between two different Parameter files
Convert – Allows Parameter file conversion from one version to another (must be within the same drive series)
Export – Export an open Parameter file to a CSV file
To Next Page
Loading...