Magnetek IMPULSE Link 5 - Page 3

IMPULSE
®
•Link 5 Instruction Manual
April 2020
Page 3 of 47
5.2.3. OmniPulse DDC Series 2 & MagnePulse DMC Series 2 Flash Utility .................................................. 36
6. DataLogger Maintenance .............................................................................................................................. 37
6.1. Updating DataLogger Series 4 Firmware ..................................................................................................... 37
7. Software Updates........................................................................................................................................... 38
Appendices ............................................................................................................................................................ 41
Appendix A: Wiring for Wireless Diagnostic System Base Unit ......................................................................... 41
Appendix B: Wiring for Wireless Diagnostic System Remote Unit ..................................................................... 42
Appendix C: Drive to PC Serial Wiring ............................................................................................................... 46
Service Contact Information
For questions regarding service or technical information contact:
1-866-MAG-SERV
(1-866-624-7378)
Company Information
Magnetek Material Handling
N49 W13650 Campbell Drive
Menomonee Falls, WI 53051
Telephone: 800-288-8178
Website: www.magnetekmh.com
E-mail: field.service@magnetek.com
Fax Numbers:
Main: 800-298-3503
Sales: 262-783-3510
Service: 262-783-3508
Magnetek, Inc. has additional satellite locations for Canada and the United States. For more information, please
visit http://www.magnetek.com.
© 2020 MAGNETEK
All rights reserved. This notice applies to all copyrighted materials included with this product, including, but not
limited to, this manual and software embodied within the product. This manual is intended for the sole use of the
person(s) to whom it was provided, and any unauthorized distribution of the manual or dispersal of its contents is
strictly forbidden. This manual may not be reproduced in whole or in part by any means whatsoever without the
expressed written permission of MAGNETEK.