16 Series, Model - 2816 4WD
POWER TAKEOFF GUARDS
All tractors have a safety guard for the Rear PTO shaft and a safety
cover for
the Mid PTO shaft.
Whenever a PTO driven machine is in operation, the PTO guard must
be in place for most operations to prevent injury to the operator or
bystanders. Where attachments, such as pumps, are installed on the
PTO shaft (especially if the tractor PTO guard is moved upward or re-
moved) extended shielding equivalent to the PTO guard must be in-
stalled with the attachment. Install the PTO guard to its original posi-
tion immediately when the attachment is removed.
REAR PTO GUARD
MID PTO COVER
M126A
57
OPERATING INSTRUCTIONS
____________________________________________
To Next Page
Loading...
