Mahindra ML170 series - Page 43

42
7.1.4. Remove snap pins from handle pins located in
bearing boxes.
Bearing Box
Handle Pin
Snap Pin
7.1.5. Remove handle pins from bearing boxes.
Bearing Box
Handle Pin
7.1.6. Remove parking stands from storage positions
in the boom crosstubes. Return hairpin cotters to
storage positions.
Hairpin Cotter
in Storage Position.
Parking Stand
in Storage Position.
7.1.7. Position parking stands in attaching brackets on
inside of each boom arm. Secure using clevis pins
and hairpin cotters.
Clevis Pin and Hairpin Cotter
in Park Position.
Attaching Bracket.
Parking Stand
in Park Position.