Mahindra ML170 series User Manual

65
19.1.4. When Skid Steer Tool Carrier attachment is
aligned with bucket or attachment, raise loader boom
slowly making sure Skid Steer Tool Carrier vee
components engage. Then roll Skid Steer bucket or
attachment back slowly.
19.1.5. Position loader so attachment is
approximately 1" off ground.
19.1.6. To position handles into the
handle engaged position, push skid
steer tool carrier handle downward
until they latch into position.
Push Handles
Downward.
NOTE: Handles should be positioned parallel to ground if
properly latched.
IMPORTANT: If properly latched into skid steer tool carrier
attachment, the lower skid steer groove pin should be contacting
quick attach pin support bar.
(2) Handles engaged position.
(3) Groove pin.
(4) Contact point.
(5) Pin support bar.
19.1.7. Position loader so attachment is
approximately 1" off ground.
1" off ground.

Mahindra ML170 series Specifications

General

Brand	Mahindra
Model	ML170 series
Category	Tractor
Language	English