Mahr Millimar C 1200 User Manual

29
Mahr GmbH • Millimar C1200
Ó
ü
q
Measurement Display Setup System
Display to center on
Nominal value
Tolerance
Measurement Display Setup System
Resolution 0.001
Display style Analog & digital
Color scheme Standard
Display to center on Nominal value
Brightness 80%
t u q
Measurement Display Setup System
Resolution 0.001
Display style Analog & digital
Color scheme Standard
Display to center on Nominal value
Brightness 80%
t
ü
q p
4.4 Centering the display
– Press the ON / OFF key
=> Standard menu appears
– Press u to select the Display
menu
– Press q to select the Center
display to submenu
– Press ü to conrm
– Press q p to select the required
Centering
With asymmetric tolerances, the
tolerance eld can be displayed
outside the scaled analog display.
In this case, it is advisable to
center the display to the center of
the tolerance rather than to the
nominal size.
– Press ü to conrm or Ó to cancel
the selection
– Press the ON / OFF key to exit the
input menu.

Mahr Millimar C 1200 Specifications

General

Brand	Mahr
Model	Millimar C 1200
Category	Measuring Instruments
Language	English