Ó
ü
q
Measurement Display Setup System
Factory settings
No
Yes
Measurement Display Setup System
Absolute mode
Customer calibration
Factory calibration
Factory settings
Keyboard-/ menu interlock
Info
t q
ü
Measurement Display Setup System
Absolute mode
Customer calibration
Factory calibration
Factory settings
Keyboard-/ menu interlock
Info
Ó
ü
q p
ü
6.4 Resetting to factory settings
– Press the ON / OFF key
=> Standard menu appears
– Press u to select the System
menu
– Press q to select the Factory
settings submenu
– Press ü to conrm
If Yes is selected, all of the
settings are reset to the factory
settings.
– Press ü to conrm or Ó to cancel
the selection
=> The measuring instrument
switches off automatically.
All of the default settings must
be entered again after the restart
(see Initial operation, page 14).
!
To Next Page
Loading...
Need help?
General
