Mahr Millimar C 1200 User Manual

39
Mahr GmbH • Millimar C1200
Measurement Display Setup System
Customer calibration
Enable
Probe calibration
Factory standard calibration
Customer calibration Reset
Ó
ü
q p
ü
Ó u q p
Calibration Min Nominal value Calibration Max
-1.000 -0 1.000
Measurement Display Setup System
Customer calibration
-
0 0 1 . 0 0
0
Measurement Display Setup System
Absolute mode
Customer calibration
Factory calibration
Factory settings
Keyboard-/ menu interlock
Info
Ó
ü
q p
ü
6.2.3 Conducting a factory
standard calibration
– Press the ON / OFF key
=> Standard menu appears
– Press u to select the System
menu
– Press q to select the Customer
calibration submenu
– Press ü to conrm
– Press q to select Factory
standard calibration
– Press ü to conrm or Ó to cancel
the selection
– Enter value for Calibration Min
(e.g. -1.000 mm). Press u to
select the required position and
press q p to enter the required
value.
– Press ü to conrm or Ó to cancel
the selection

Mahr Millimar C 1200 Specifications

General

Brand	Mahr
Model	Millimar C 1200
Category	Measuring Instruments
Language	English